Missed 31 Oct?

Missed the tax return deadline? Lodge your late return with us now

included

• Overdue prior years sorted too

Missed 31 Oct?

Missed the deadline? Lodge your late return now

• Prior years too

Back to Blogs

ATO Small Business Benchmarks Explained for 2026

📖 Table of Contents

ATO Small Business Benchmarks Explained for 2026

ATO small business benchmarks - cafe owner checking business costs with a calculator and ratio charts

ATO small business benchmarks are published ratio ranges that let you compare your costs with similar businesses in your industry and turnover band. The latest set covers the 2023-24 year across 100 industries, and the ATO uses them as one of several risk indicators, never in isolation.

A benchmark is a comparison, not a target. Sitting outside the range is not a fail, and sitting inside it does not prove your records are right. What the range does is tell you where to look.

This guide covers how the ranges are built, how to find and read yours, a worked example using the ATO’s coffee shop figures, and what to do if the ATO asks about your ratios.

Key takeaways

  • The latest benchmarks are for the 2023-24 year and cover 100 industries.
  • There are five tax return ratios, all worked out as a percentage of turnover excluding GST.
  • Businesses with turnover under $30,000 or over $15 million are left out of the data.
  • Activity statement benchmarks have not been produced since Simpler BAS started on 1 July 2017.
  • The ATO never uses benchmarks in isolation, but it can use the key benchmark to estimate income when records are missing.
  • Check your ratios at least once a year, before you lodge.
ItemDetail
Latest benchmark year2023-24
Industries covered100
Turnover included in the data$30,000 to $15 million
Tax return ratiosCost of sales, total expenses, labour, rent and motor vehicle, each to turnover
Turnover measureExcludes GST
How your industry is chosenBusiness industry code, main business activity and trading name
Where to checkThe business performance check in the ATO app, or the Benchmarks A-Z list

What do the ATO small business benchmarks measure?

Each of the ATO small business benchmarks is a range, not a single number, to allow for differences in location and circumstances. The ATO compare your business page says businesses are allocated to an industry using their business industry code, the main business activity on the tax return and the trading name.

There are five tax return ratios. The ATO ratio calculations page says each one is the amount at the relevant labels divided by turnover (excluding GST), multiplied by 100.

RatioWhat it compares
Cost of sales to turnoverStock and materials bought for sale or production (excluding labour) against sales
Total expenses to turnoverAll business expenses against sales
Labour to turnoverWages, super and contractor payments, excluding amounts paid to associated parties such as the owner
Rent to turnoverRent on business premises against sales
Motor vehicle to turnoverVehicle expenses against sales

Who is in the comparison?

The ATO benchmarking methodology explains how the population is chosen:

  • Businesses with an active ABN that lodged a tax return for the year and reported the relevant industry code
  • Turnover between $30,000 and $15 million
  • At least one year in business before the start of the financial year
  • Only one business activity reported on the return
  • Identified 12 months after the lodgement due date, so the 2023-24 population was identified after 31 October 2025

Activity statement versions of the ATO small business benchmarks are no longer produced. The ATO types of benchmarks page says they stopped from 1 July 2017 when Simpler BAS was introduced, so any activity statement range you find is out of date.

How do I find and read my industry benchmark?

  1. Choose the right business industry code for your business using the ATO business industry code tool.
  2. If you run more than one business, work out the figures for each one separately.
  3. Use the business performance check in the ATO app, or find your industry in the Benchmarks A-Z list.
  4. Pick the turnover band that matches your full-year turnover, excluding GST.
  5. Compare each ratio with the published range and note anything outside it.

Make sure your BAS, payroll and tax return figures agree before you compare. If they do not, the ratio will be wrong before you start. Our BAS and GST service can reconcile them for you.

Worked example: a coffee shop at $400,000

The ATO manual comparison guide publishes these key benchmarks for coffee shops. They apply to coffee shops only.

Annual turnover$65,000 – $250,000$250,001 – $600,000More than $600,000
Cost of sales range34% to 42%35% to 41%33% to 38%
Average cost of sales38%38%36%
Total expenses range73% to 86%81% to 90%86% to 93%
Average total expenses79%86%89%

The facts

A coffee shop has turnover of $400,000 (excluding GST), which puts it in the $250,001 to $600,000 band. Cost of sales is $152,000 and total expenses are $360,000. The owner also takes $50,000 a year in drawings.

Ratios with the books coded correctly

RatioCalculationResultRange
Cost of sales$152,000 ÷ $400,000 × 10038%35% to 41% (inside)
Total expenses$360,000 ÷ $400,000 × 10090%81% to 90% (top of range, above the 86% average)

Cost of sales is right on the average. Total expenses sit at the top of the range, so the owner should look at wages, rent and whether any private costs have gone through the business before assuming anything else.

Ratios with the owner’s drawings coded as wages

RatioCalculationResultRange
Cost of sales$152,000 ÷ $400,000 × 10038%35% to 41% (inside)
Total expenses($360,000 + $50,000) ÷ $400,000 × 100102.5%81% to 90% (above)

One coding error moves total expenses from 90% to 102.5%, well above the range. Nothing about the business changed, only how the drawings were recorded.

Tip

The ATO gives a similar example of a plumber whose total expenses showed 120% against a range of 75% to 86%. He had accidentally included his own wages and super, which are payments to an associated party and do not belong in the benchmark figures.

What does it mean if my business is outside the range?

If you are inside the range, the ATO says you do not need to do anything else. If you are above it, your expenses are high compared with your sales. The ATO page on being outside the range lists possible reasons:

  • Higher wastage than similar businesses
  • Goods taken for personal use counted as business stock
  • Paying more for stock or materials than competitors
  • Rent or labour that is high for your sales, such as too many staff in quiet periods
  • A lower mark-up than competitors
  • Sales not fully recorded, or weak cash controls

The ATO says it never uses benchmarks in isolation when deciding to review a business. It does compare tax return figures with the key benchmark for your industry, and it can use the key benchmark to work out how much tax should have been paid where records are missing or not good enough.

Watch out

In one ATO example, a supermarket operator had a cost of sales ratio of 88% against a key range of 71% to 77%. The audit found sales and banking had not been reconciled for years, and the owners paid more than $275,000 in tax and $44,000 in penalties.

How do I check my books before I lodge?

  1. Confirm the industry code matches the work that earns your income.
  2. Reconcile BAS sales and purchases to your accounts and tax return, and take GST out of turnover.
  3. Match payroll and super to the labour figure, and leave out payments to the owner or other associated parties.
  4. Remove private use of stock and vehicles.
  5. Work out cost of sales and total expenses first, then labour, rent and motor vehicle.
  6. Look into any ratio outside the range and keep the leases, rosters and invoices that explain it.

Your records are what explain a gap against the ATO small business benchmarks later. The ATO record keeping rules say you need to keep most records for 5 years, and they must be in English or easily converted to English. Our bookkeeping service and our guide to bookkeeping for tradies cover the monthly routine.

What if I find a mistake?

Fix it. The ATO correcting a mistake page says that if you tell the ATO about a mistake voluntarily, penalties can be reduced, and reduced further if you tell it before an audit starts. Our guide on how to amend a tax return walks through the steps.

How do I respond to an ATO benchmark query?

  1. Read which income year and which ratio the ATO is asking about.
  2. Do not guess a percentage on the phone. Ask for the question in writing.
  3. Pull the tax return, BAS, payroll reports and the working papers that reconcile them.
  4. Reply with the business reason for the difference, or with the amendment if you found an error.
  5. Keep a copy of what you sent and the date.

Our guide to an ATO audit letter explains what happens next, and GST audit triggers covers other things that draw attention. If a query becomes a dispute, our ATO dispute resolution service can help.

Frequently asked questions

What are the ATO small business benchmarks?

They are published ranges for five ratios, such as cost of sales to turnover, that let you compare your business with similar businesses in your industry and turnover band. The latest set covers 2023-24 and 100 industries.

What year are the latest benchmarks for?

The current benchmarks are for the 2023-24 financial year. The ATO identifies the population 12 months after the lodgement due date, so there is always a lag.

Will the ATO audit me if I am outside the benchmark?

Not automatically. The ATO says it never uses benchmarks in isolation and looks at a wide range of factors before reviewing a business. Being outside the range is a reason to check your records.

What if my industry is not in the benchmarks?

The ATO suggests using the industry benchmark information in its taxation statistics instead. Do not borrow the range from a different trade.

Do the benchmarks include GST?

No. All tax return benchmark ratios are worked out on turnover excluding GST, so take GST out before you compare.

Talk to specialist before it costs you

15-minute discovery call. No obligation, no jargon.

Talk to a registered tax agent

Want your ratios checked against the ATO small business benchmarks before you lodge? Speak with a registered tax agent at Nanak Accountants & Associates on 1300 626 258, or book a consultation with our team. Our business benchmarking service reconciles your figures to your BAS and tax return, and we work with sole traders and small businesses across Australia.

This article is general information only and is not personal financial or tax advice. Information checked against ATO sources on 16 November 2026.

Weekly Insights

Weekly Tax &
Business Briefings

Expert guidance for Australian founders

10K+
Subscribers
Weekly
New Content
Puneet Singh, Founder and Principal Accountant, Nanak Accountants & Associates
Written by

Puneet Singh

Founder & Principal Accountant | Registered Tax Agent
MIPA AFA, ASA (CPA Australia), MBA, MPA, B.Com
12+ Years Industry Experience

Puneet Singh founded Nanak Accountants & Associates in 2020 and has grown it to 25+ staff across eight offices, serving more than 10,000 clients a year. He is a registered tax agent and IPA member who works with small businesses, tradies, property investors and migrant families on tax, business structuring and ATO matters.

Under his leadership, the firm won Excellence in Professional & Business Services at the Wyndham Business Awards 2026.

Connect on LinkedIn →